DODGE RAM FORUM banner

*Update on Intermittent power loss.

4K views 2 replies 3 participants last post by  ramvan2500 
#1 ·
I still have the issue,
I tried a nice fuel pressure gauge and it runs at a pretty steady 45 lbs, Idle and revved, Did not drive down the road with engine cover off, But did put in drive and held the brake firm and gave it fuel to trans stall and no change in pressure,
I also took a rod and ran it down into the intake and wiped it about the plenum plate and it came up clean and dry, So I am thinking not leaking vacuum.
It is not throwing a code,
Replaced, Plugs, Wires, Coil, Cap, Rotor, and TPS,
Took it for a 20 mile drive and got it to stumble just once.
I went and bought a Distributer ignition pick up and just tossed it in, Didnt get a chance to drive it yet.
Are there any more suggestions?
I would have edited my original post but did not see an Edit clickie.
Anyway, Hows the fuel pressure?
What else can I look at?
Thank you
Peter and Eileen
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top