DODGE RAM FORUM banner

Zf rearend modifing?

2K views 13 replies 8 participants last post by  TBILLIOT 
#1 ·
Ok so what has to be done to the zf rearend to accept the older model gears and locker?
 
#3 ·
As long as you just want no more than 4.10 gears, you can get them at Dodgeparts.com for not too bad a price, and they are stock Zf gear set. I do not know if the locker is different. That is what I got!
 
#8 ·
sorry no part number you will have to look it up on the site. i paid $230.00 from that company.
 
#10 ·
If you change out the rear you have to do the front gears. Dodge decided to weld the front gear/pinion to the carrier and it requires you change out the whole front end to a 2010 front end. I just had an LSD installed last week, would have done the gears too if it were possible.
 
#13 ·
did they weld the ring gear to the carrier in 2011? i have an 08 and i was looking to do a gear swap to 4.56 when i get my suspension lift and 37s. does this affect 2010 and down?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top