DODGE RAM FORUM banner

blew the rear brake line on my 01 2500

1K views 1 reply 2 participants last post by  prattman 
#1 ·
So I recently had my rear brake line blow on my 01Cummins behind the fuel tank haha seems to be the common place neways does neone no where to find that part that the hard line goes into n it comes out that high pressure rubber down to my rearend I can find the hose but I need to replace that bracket where they connect together or can I just forget that joiner n just run it all hard line?? Help
 
#2 ·
I ordered an EGR Stainless Steel Pre-bent brake line kit from Circle Track Supply for my old 1998 Dodge Cummins 2500 4x4. I had a shop do the swap. I don't remember what I paid for the install as I had other work done at the same time. The line that usually rusts out is the brake line that runs down the drivers frame rail next to the fuel tank as you've discovered. Here's the link for the kit: http://www.circletracksupply.com/pre...s-2wd-4wd.html . For $349.95 I think it's worth it. Do it once and be done with it. Also see this post: http://www.ramforumz.com/showthread.php?t=54728&highlight=rusty+brake+lines -Glen
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top