I'm looking for an SRT-10 owner to help with my research. Trying to find out more regarding the suspension components specifically, maybe a few other little details. Anyone out there able to assist in this?
That's a start! I'm really looking at the front springs, and maybe some of the sway bar components... trying to get some measurements and specs though.
What we need to begin with is the 3 letter code for each spring i.e. we need an SRT build sheet. If someone is willing to give up the VIN from their standard cab SRT, I can pull a sheet and get the codes. Keep in mind your truck would ride differently than an SRT because of the weight and engine placement differences of the 8.3.
Without knowing the specs (such as spring rate and height) for both springs and the sprung weight over the front wheels, I don't think there's anyway to say unless someone else has tried it already. Worst case scenerio, it could even raise the front end.
i've attached a pic of the strip below. my dad has some of the mrk items - their prices are a complete rip off for what you get. $40+ for a piece of vacuformed lexan that looks like a 6 year old cut it out with scissors is a bit much.
I just bought the front spring on a 05 SRT RC for my 05 QC, they will lower mw 1.5" as for what they will do for your truck you might try to contact Tony (JTSVP) at 704-214-7849. He is the SRT-10 GOD!
Good Luck..